Sticker & Labels

Custom stickers and labels are printed adhesive graphics supplied on rolls, sheets or as die-cut singles, in paper, vinyl, clear and kraft materials. We print them for product labelling, seals, batch coding, branding and promotion, with the adhesive matched to the surface you’re sticking to. Orders start at 200 units.

The material and the adhesive are two separate decisions, and the adhesive is the one that causes almost every label failure we’re asked to fix. A label that lifts off a squeeze bottle, curls on a candle jar or discolours in a shower isn’t a printing problem. It’s a specification problem, and it’s avoidable.

Adhesive Has to Match the Surface

Labels don’t fail randomly. They fail on predictable surfaces, and it’s worth knowing which before you order a few thousand.

Surfaces where standard adhesive struggles:

• Squeeze bottles and flexible plastics. HDPE, LDPE and polypropylene, the plastics most squeeze bottles and tubes are made from, hold adhesive poorly. Labels lift at the edges, especially after the bottle has been squeezed a few times. These need an adhesive specified for the material.
• Textured and powder-coated surfaces. Adhesive only contacts the high points, so effective bond area is a fraction of the label. High-tack adhesive is needed.
• Cold and damp surfaces. Most adhesives need a minimum application temperature. Applying to a chilled or condensation-covered container gives you a bond that lets go a day later.
• Curved and small-diameter containers. A stiff face material fights the curve and lifts at the ends. The tighter the curve, the more conformable the material needs to be.
• Recycled and uncoated cardboard. Dusty, fibrous surfaces take adhesive less reliably than a coated box.

Tell us what you’re sticking to. Not the product, the actual surface: glass jar, HDPE squeeze bottle, kraft box, powder-coated tin. It’s the single most useful thing you can put in a label enquiry and it takes one line.

Products That Attack Their Own Labels

Some contents damage labels from the inside out, and this catches out small beauty and food brands regularly.

• Essential and fragrance oils bleed into paper. A paper label on a bottle with oil residue on the outside develops translucent stains within weeks. Beauty, candle and soap brands run into this constantly. Synthetic face materials solve it.
• Bathroom and shower products need waterproof material. Paper labels in a wet environment soften, wrinkle and peel. Vinyl or polypropylene face stock with a suitable adhesive is the fix.
• Chilled and frozen goods need freezer-grade adhesive, applied at the right temperature.
• Greasy food contact degrades paper labels quickly.
• Sunlight fades ink. Products displayed in a window or sold outdoors need UV-stable inks and a laminate, or your brand colour drifts over a season.

Materials

Finishes: matte, gloss and soft-touch lamination, spot UV, foil stamping, and UV-stable laminates for outdoor or window-display use.

Rolls, Sheets or Singles

This matters more than it sounds, because it determines how fast your team can apply them.

• Rolls are what you need for any machine applicator, and they’re faster by hand too. If you’re using an applicator, we need the core size, roll outer diameter limit, and unwind direction your machine requires, because a correctly printed label on the wrong unwind direction is unusable.
• Sheets suit low volumes, mixed variants and hand application where you’re peeling a few at a time.
• Die-cut singles suit very low volumes and presentation use, like seals on gift packaging.

At any real volume, ask us about rolls. The labour saving is usually larger than the price difference between formats.

Uses

• Product labelling: ingredient declarations, net weight, branding, batch and expiry codes
• Variant coding: one printed box, a label per scent, shade or flavour. The cheapest way to run a wide range, and the reason many of our box customers order labels alongside.
• Tamper-evident seals: across a gable box peak, a jar lid, or a delivery carton
• Branding on plain packaging: a well-designed label turns stock kraft into branded packaging at minimal cost
• Barcode and SKU labelling: for retail scanning
• Promotional and seasonal: applied over standard packaging, removable where needed
• Shipping and handling marks: fragile, this way up, allergen and handling instructions

What Our Customers Say

“Custom soap boxes. Daniel was great to work with: professional, knowledgeable, and helpful throughout the process. My order arrived earlier than expected, and I truly appreciated his guidance on sizing and setting up the artwork correctly. Highly recommended!” Ava Nicole, Manager, soap and skincare brand

“I had a great experience with The Grand Packaging. Crystal helped me with my order, and her design team did an amazing job. They gave me full creative freedom and added thoughtful details that made my boxes look luxury. I’m extremely happy with the whole process and the final products.” Carrie, Brand Owner

Pricing and Minimum Order Quantity

The minimum order for custom stickers and labels is 200 units. Specialty materials and finishes may need a higher run.

Labels are the lowest-cost printed item we produce, which is exactly why they’re such an effective lever. A plain box plus a well-designed label is often 40 to 60% cheaper than a fully printed box, and for brands carrying many variants the gap widens with every SKU. If you’re weighing full print against plain-plus-label, ask us to quote both.

First-time customers currently receive 20% off their first order.

How Your Order Is Produced

1. Send your requirements. Label size and shape, quantity, the surface you’re applying to, whether it’s wet, oily or chilled, and roll or sheet format with applicator specs if relevant.
2. Receive your quote. Face material and adhesive specified against your surface and contents.
3. Approve the proof. We check bleed, colour mode, resolution, die line, and barcode contrast and clear space where applicable.
4. Request a physical sample (optional). Order within 30 days and the cost is credited back. Apply it to your actual container and leave it a week, because adhesive performance shows up over days, not minutes.
5. Production. Printing, laminating and die-cutting, finished on rolls, sheets or as singles.
6. Quality check and dispatch. Packed and shipped.

Standard production runs 8 to 12 days after proof approval, plus transit.

Frequently Asked Questions

What is the minimum order for custom stickers and labels?

The minimum is 200 units. Specialty face materials, laminates and finishes may require a higher quantity to run economically.

How long does production take?

Standard production is 8 to 12 days after proof approval, plus transit time.

Why do my labels peel off squeeze bottles?

Because HDPE, LDPE and polypropylene, the plastics most squeeze bottles are made from, hold standard adhesive poorly, and flexing the bottle works the edges loose. The fix is an adhesive specified for those materials, along with a face stock conformable enough to follow the curve. Tell us the bottle material and we’ll specify for it.

Which labels are waterproof?

Vinyl and BOPP face materials with a suitable adhesive. Paper labels soften, wrinkle and peel in wet conditions, so anything used in a bathroom, shower, kitchen or chilled environment needs a synthetic face stock rather than paper.

My essential oil labels are staining. What went wrong?

Oil bled into a paper face stock. Fragrance and essential oil residue on the outside of a bottle migrates into paper and shows as translucent patches within weeks. A synthetic face material stops it. This is one of the most common problems we’re asked to fix for beauty and candle brands.

Should I order labels on rolls or sheets?

Rolls for any real volume, especially if you use an applicator, since they’re much faster to apply. Sheets suit low volumes and mixed variants. If you’re using a machine, send us the core size, maximum roll diameter and required unwind direction, because a label printed on the wrong unwind direction can’t be run.

Are labels cheaper than printing the box?

Considerably, and the saving grows with variant count. A plain box with a designed label is typically well below the cost of full box printing, and you can change one variant without reordering the range. For brands carrying several scents, shades or flavours, it’s usually the right structure.

Will my barcode scan on a label?

If the artwork allows it. Barcodes need dark bars on a light background, clear margin either side, and enough size for the scanner to resolve. Keep barcodes off foil and metallic stock, which reflects light and defeats the read. Send the barcode with your artwork and we’ll check it.

Can labels be removable?

Yes. Removable adhesive lifts cleanly without residue, which suits promotional messaging, temporary pricing and seasonal overlays on standard packaging. Say so at quote stage, since it’s a different adhesive rather than a different label.

Why Brands Order Labels From Us

• Adhesive specified to your surface. We ask what you’re sticking to, not just what the label says.
• Contents considered. Oils, moisture and cold all attack labels, and material is chosen against them.
• Applicator specs respected. Core size, roll diameter and unwind direction confirmed before production, not after.
• Barcodes checked before press. Contrast and clear space reviewed so labels scan at retail.
• Honest cost comparison. Plain box plus label quoted against a fully printed box, so you can see the real saving.
• Sample credited back. Apply it to your own container and leave it a week before committing.
• US-based support. Quotes, proofs and phone support in US hours from our St. Petersburg, Florida office.

Request a Quote for Custom Stickers and Labels

Tell us the label size, the quantity, and most importantly the surface you’re applying to and what’s in the container. That’s what determines whether the label is still there in six months.

Call: +1 (630) 228-1764 Email: sales@thegrandpackaging.com Hours: Monday to Friday, 9:00 am to 5:00 pm ET

Last updated: September 2026.